7 Preparation
MN031-447-S0-20101217-EN
NightKNIFE / Ligator
39
Shank tube
NOTE
Risk of material damage to shank tube from metal
brushes!
X
Use only the plastic brushes supplied with the
instrument to clean the shank tube.
X
If necessary, use a steam sprayer for cleaning.
2
3
1
1. Use the small cleaning brush to clean the inside of the
proximal end
3
of the shank tube.
2. Use the large cleaning brush to clean the inside of the
distal end
1
of the shank tube.
3. Rinse the distal end of the shank tube B with fully
demineralized water or distilled water to clean the inside
of the housing. At the same time, actuate the trigger
2
to
clean the actuation mechanism inside the housing.
MN031-447-S1 EN
