manualshive.com logo in svg

Bowa LIGATOR, Operating Manual

Introducing the Bowa LIGATOR, a cutting-edge device designed for efficient and accurate cord ligation. To ensure optimal performance, don't forget to grab your free Operating Manual. Downloadable from manualshive.com, this comprehensive manual provides step-by-step instructions for seamless usage of your Bowa LIGATOR, empowering you with essential knowledge.

Share
Download
background image

 

6  Dismantling 

MN031-447-S0-20101217-EN 

NightKNIFE / Ligator 

29 

1

 

3.  Ensure that the blade with insertion aid 

E

 is aligned to 

the middle of the fixed jaw 

A1 

at position 

1

. 

4.  If necessary, use your fingers to align insertion aid 

E1

 in 

the middle. 

5.  Hold the insertion aid 

E1

 by the sides in position 

1

 and 

move the sliding tube slowly in the arrow direction until 
the blade 

E2 

distinctly clicks in place. 

ª

 

With the blade attached, the spring remains 
compressed. 

MN031-447-S1 EN

Summary of Contents for LIGATOR

























































Reviews:

No comments

Related manuals for LIGATOR

Landoll 2130 Operator'S Manual preview
2130
Brand: Landoll Pages: 83
Daga AB Directions For Use Manual preview
AB
Brand: Daga Pages: 24
DAF DAVIE XDc II Quick Start Manual preview
DAVIE XDc II
Brand: DAF Pages: 68
e+p Elektrik Handels HDT 300 Quick Installation Manual preview
HDT 300
Brand: e+p Elektrik Handels Pages: 2
Pari Trio Instructions For Use Manual preview
Trio
Brand: Pari Pages: 12
laerdal SimPad PLUS Wi-Fi Setup preview
SimPad PLUS
Brand: laerdal Pages: 2
laerdal SimPad PLUS Important Product Information preview
SimPad PLUS
Brand: laerdal Pages: 104
laerdal SimPad User Manual preview
SimPad
Brand: laerdal Pages: 33
Lafayette LL-15 User Manual preview
LL-15
Brand: Lafayette Pages: 2
Laserworld EL-60 G Manual preview
EL-60 G
Brand: Laserworld Pages: 8
Laserworld EL 200 LED User Manual preview
EL 200 LED
Brand: Laserworld Pages: 6
LaserLiner ActivePen Manual preview
ActivePen
Brand: LaserLiner Pages: 56
LaserLiner AC-tiveMaster Operating Instructions Manual preview
AC-tiveMaster
Brand: LaserLiner Pages: 54
Taylor C712 Operator Training preview
C712
Brand: Taylor Pages: 41
PASCO ME-9430 Instruction Manual And Experiment Manual preview
ME-9430
Brand: PASCO Pages: 30
Yetter 5000 SERIES Operator'S Manual preview
5000 SERIES
Brand: Yetter Pages: 24
Yetter 5000 SERIES Owner'S Manual & Parts List preview
5000 SERIES
Brand: Yetter Pages: 32
D+H RZN 43-E Series Operation preview
RZN 43-E Series
Brand: D+H Pages: 2

Brands by name

Popular brands

Load more brands