Boumatic HandyFloor 2015, Installation And Maintenance Manual

Page: 9 / 57

Page 9
9e1034
Anyone carrying out work or activities in connection with the product must carefully read the manual and sign to
confirm that they have understood it and will act accordingly!
Responsibilities:
• AC power wiring for voltage over 40 V (in Europe 50 V) must be done by a qualified (licensed) electricain in
compliance with the latest edition of the ANSI/ NFPA-Standard 70, National Electrical Code (USA) or either LVD
2006/95/EC oder EMC 2014/30/EU (in Europe) and in complianced with the local wiring codes as applicable.
• Any work on the hydraulic and pneumatic equipment should only be performed by specialist personnel trained
for this purpose.
• Any welding should only be performed by specialist personnel with knowledge in welding.
• Other installation, major maintenance, and service work must be done by an authorized BouMatic dealer.
• Product / system checkout and troubleshooting must be done by an authorized BouMatic dealer.
In addition, special qualifications are required for the following activities:
• Transportation
• Handling
• Maintenance
• Cleaning
• Installation
• Start-up
• Service
• Troubleshooting
• Repairs
Deviation from these instructions could affect product performance or create a hazardous situation. Under no
circumstances will BouMatic be responsible for any problems caused in whole or in part by a deviation from the
procedures specified in these instructions without prior written approval from BouMatic.
Operation steps may be performed by the owner/operator once the dealer or technician has successfully finished
the product/system checkout. The owner/operator is responsible for properly operating, maintaining, and moni-
toring the product/system to ensure that it works properly.
Disclaimer
No warranties are contained in these instructions. The division of responsibilities, stated above, is a general reminder
of those provisions in the applicable dealer contract and does not change any agreement between BouMatic and
the dealer. Information in these instructions is not all-inclusive and cannot cover all unique situations.
2.3 PERSONNEL QUALIFICATION