Page 14
9e1034
3.2 DRAWING OF COW BRUSH
5. INSTALLATION INSTRUCTIONS
When building a milking parlour, the HandyFloor should only be installed after the construction of the stall
system and milking system is completed. This minimises the risk of the floor being overloaded or damaged during
construction, and objects (screws etc.) that may be lost in the milking pit during installation of the stall system and
milking equipment can easily be picked up again.
Subsequent installation instructions are for HandyFloor in milking parlours. Should you have any questions in
relation to these installation instructions, do not hesitate to contact your BouMatic dealer or BouMatic.
The HandyFloor is installed in the following 8 steps.
1.
Check installation dimensions
2. Install guide for lifting unit
3.
Fit lifting brackets onto guide
4.
Install frame for floor
5.
Install cables and control
6.
Install ramp
HA
AC
NDY
L
FA
FLO
LC
O
O
R
N
7. Install stringers and plastic gratings
8.
Final test
Summary of Contents for HandyFloor 2015
