Boumatic HandyFloor 2015, Installation And Maintenance Manual

Page: 11 / 57

Page 11
9e1034
Attention!
• Please note that parts or accessories not supplied by us and instructions not provided by BouMatic
are not checked or released by us either.
• If such products are installed or used, this can have a negative effect on the specified properties of
BouMatic products and put people and animals at risk.
• The manufacturer cannot be held liable for injury to people and animals or for damage to Bou-
Matic products caused as a result of using non-original parts or accessories or by incorrect settings.
• During repair and service operations, always cut the power to the control unit by turning off the
switch.
• The control unit contains 230 V AC circuits and may only be opened by a BouMatic installer or a
qualified electrician.
• Installation, together with any repairs
during the warranty period
, may
only
be undertaken by an
authorised BouMatic dealer/installer, or in accordance with instructions from BouMatic, otherwise
the warranty will be invalid.
• When the Handy Floor is in motion and the milker operating the floor is adjusting the height, he
must
constantly ensure
that people on the floor do not get their hands, arms or legs trapped
between the floor and the walls of the milking pit. To minimise the risk of getting trapped in the
milking pit, the distance from wall to floor is approx. 5 cm.
• The Handy Floor control is designed in such a way that the manual controller’s up or down button
must be held pressed to operate the floor. If the button is released, the floor stops immediately for
safety reasons.
• Never crawl beneath the HandyFloor without the floor being securely supported.
2.8 NOISE
The noise level does not exceed 70 dB (A).