Boston Whaler 370 Outrage, Owner'S Manual

Page: 127 / 204

3-47
Section 3 • Systems & Components Overview & Operation
370 Outrage
R
Section 3 • Systems & Components Overview & Operation
Radial Outriggers (Option)
If equipped, there are two(2) radial outriggers. One
each located on the port and starboard side of the
hardtop. The outriggers are adjustable to provide
ease of operation and convenient ready-to-use
storage.
Operation
To extend the outriggers:
S t a r t i n g w i t h t h e
outboard section, extend
each section out until the
locking button snaps into
place.
Radial Outriggers (Option)
Fig. 3.47.1
1
2
3
4
HARDTOP
HANDLE
UPPER UNIT
CAM KNOB
EXTENDABLE SHAFT
SHAFT LOCK
LOWER UNIT
2
3
4
5
6
7
5
6
1
7
To position the outriggers:
Raising or lowering:
Tu r n t h e c a m k n o b
c o u n t e r c l o c k w i s e t o
loosen, position the
outrigger up or down to
the desired position and
tighten the cam by turning
the knob clockwise.
Rotating the outriggers:
Pull down on the lower
unit handle and rotate
to the desired position.
When released the handle
will hold the outrigger
shaft into position.
To retrieve the outriggers:
Starting with the inboard
most section, Push in the
locking button on each
succeeding section and
insert sections into the
shaft until all sections are
completely seated in the
stowed position.
Maintenance
With very little care your equipment will maintain its
appearance and operate trouble free. When at port,
extend the outriggers and fl ush with fresh water,
wipe with a dry cloth and allow to air dry. When
dry collapse the outriggers to the stowed position.
Periodically lightly lubricate the cam and the shaft
of the cam knob to keep them working freely.
7