32
Settings Made When the Power is Switched ON
4.
Press the WRITE button.
After the MEMORY Number indicator begins flashing rapidly, the setting is stored
in memory and the unit returns to its ordinary state.
* To cancel the setting change and return the unit to its ordinary state, then before you press
the WRITE button, operate the MEMORY/TAP or ON/OFF pedal.
* This is set at the factory to “CTL 2.”
* When you connect an external pedal after making this setting, the function you have set
appears in the display, indicating that the function can be used.
• When the CTL1 mode is selected and you are using the DD-20 in conjunction
with an OD-20, you can turn the DD-20 on and off with the OD-20’s AMP CTRL
button by connecting the DD-20’s CTL PEDAL jack and the OD-20’s AMP CTRL
jack.
• When using an external pedal to turn the effect on and off with the DD-20 set to
CTL1 mode, if you try to switch the effect on or off with the DD-20’s ON/OFF
pedal, the external pedal’s actual function will differ from the function that is
indicated.
• The following parameters cannot be controlled by the external pedal when the
external pedal is being used to turn the effect on and off with the DD-20 set to
CTL1 mode.
• Recording, playback, and overdubbing in Sound On Sound (p. 21)
• TWIST (p. 22)
• WARP (p. 22)
• TAPE playback head setting (p. 23)
• DUAL short delay time setting (p. 24)
• MODULATE modulation rate setting (p. 25)
Display
Mode
Function
Foot Switch
ctl1, ON/OFF
CTL1
Switches effects on
and off
FS-5L (Latch Type)
ctl2, TAP
CTL2
Tap input
FS-5U (Momentary Type)
ctl3, MEM
CTL3
Switches Memories
FS-5U (Momentary Type)
Summary of Contents for Giga Delay DD-20
Page 40: ...40 Setting Memo fig 36 fig 36 fig 36 ...
Page 44: ...G6017366 03 2 FA1 11N ...
