21
How to Use Each Mode
How to Use SOS (Sound On Sound)
1.
Turn the MODE knob to “SOS.”
2.
Press the ON/OFF pedal to start recording.
Play what is to be used as the basic phrase.
The remaining memory is indicated as a percentage in the display.
fig.29
3.
Press the ON/OFF pedal again to stop recording.
Loop playback of the recorded phrase begins at the same time you press the pedal.
The loop time is indicated in the display as shown below.
The TEMPO indicator also flashes.
fig.30
4.
Overdub another phrase.
Sounds are overdubbed during loop playback only while the pedal is held down.
Continue to hold the pedal down as you play the phrase you want to record.
* If the ON/OFF pedal is held down only for a brief period, loop playback stops, and the
recorded phrase is erased.
By pressing the MEMORY/TAP pedal during loop playback, you can have the
delay applied to the guitar sound as loop playback continues. However, you cannot
overdub. To stop loop playback, press the MEMORY/TAP button again (we
recommend Pedal Mode 2 or 3).
Blink
Summary of Contents for Giga Delay DD-20
Page 40: ...40 Setting Memo fig 36 fig 36 fig 36 ...
Page 44: ...G6017366 03 2 FA1 11N ...
