29
Settings Made When the Power is Switched ON
Changing the Pedal Mode Settings
Use the following to change the Pedal mode settings.
* Pedal mode settings are saved even after the power is turned off.
1.
Switch off the power.
2.
While holding down the SELECT button, switch on the power.
The MEMORY 1–3 indicator corresponding to the current Pedal mode settings flashes.
The Pedal mode is indicated in the display.
3.
Set the pedal mode (1-3) pressing the SELECT button.
fig.43
4.
Press the WRITE button.
After the MEMORY Number indicator begins flashing rapidly, the setting is stored
in memory and the unit returns to its ordinary state.
* To cancel the setting change and return the unit to its ordinary state, then before you press
the WRITE button, operate the MEMORY/TAP or ON/OFF pedal.
* Only Pedal mode 3 is enabled when the MEMORY/TAP pedal is being used as a Tap Input
pedal (when the TAP indicator is lit).
* This is set at the factory to Pedal Mode 1.
Pedal
Mode
ON/OFF Pedal
MEMORY/TAP Pedal
ON/OFF Pedal
+
MEMORY/TAP Pedal
1
Effect on/off
Switches MANUAL or
MEMORY 1–4
-
2
Effect on/off
Switches MANUAL or
MEMORY
-
3
Effect on/off
Switches MANUAL or
MEMORY
Selects from MEMORY
1–4
Pedal Mode 1
Pedal Mode 2
Pedal Mode 3
Summary of Contents for Giga Delay DD-20
Page 40: ...40 Setting Memo fig 36 fig 36 fig 36 ...
Page 44: ...G6017366 03 2 FA1 11N ...
