11
Operation
4.
Press the WRITE button.
The write operation is completed when the indicator for the write-destination
memory begin to flash more rapidly.
fig.20
* To cancel the write operation, then before you press the WRITE button, rotate the knob or
operate the MANUAL/TAP pedal.
Writing
Blink
Blink rapidly
Write Finished
Please be aware that all data contained in the unit’s memory may be lost when the
unit is sent for repairs. Important data should always be written down on paper,
“Setting Memo” (p. 40). During repairs, due care is taken to avoid the loss of data.
However, in certain cases (such as when circuitry related to memory itself is out of
order), we regret that it may not be possible to restore the data, and Roland assumes
no liability concerning such loss of data.
Please be aware that the contents of memory can be irretrievably lost as a result of a
malfunction, or the improper operation of the unit. To protect yourself against the risk
of loosing important data, we recommend that you write down important data you
have stored in the unit’s memory on “Setting Memo” (p. 40).
Unfortunately, it may be impossible to restore the contents of data that was stored in
the unit’s memory once it has been lost. Roland Corporation assumes no liability
concerning such loss of data.
Summary of Contents for Giga Delay DD-20
Page 40: ...40 Setting Memo fig 36 fig 36 fig 36 ...
Page 44: ...G6017366 03 2 FA1 11N ...
