22
How to Use Each Mode
How to Use TWIST
1.
Turn the MODE knob to “TWIST.”
2.
Hold down the ON/OFF pedal.
The delay sound starts to oscillate, then the oscillation speeds up as its pitch
increases.
fig.32
3.
Release the pedal.
The oscillating sound begins to fade away, and the normal delay sound returns.
This effect works very well with distortion sounds, and combining it with
distortion results in an even wilder effect (you can adjust the volume of the
oscillating sound with the E.LEVEL knob). Using this for the ending of a song is
effective.
* You can switch the normal effect on and off by pressing the ON/OFF pedal only briefly.
How to Use WARP
1.
Turn the MODE knob to “WARP.”
2.
Hold down the ON/OFF pedal.
The feedback level and volume increase.
fig.32
3.
Release the pedal.
The effect corresponding to the knob positions (E.LEVEL, F.BACK) resumes.
You can create fantastic effects by repeating the “warped” delay sound and then
playing a phrase on top of this.
* You can switch the normal effect on and off by pressing the ON/OFF pedal only briefly.
Blink
Blink
Summary of Contents for Giga Delay DD-20
Page 40: ...40 Setting Memo fig 36 fig 36 fig 36 ...
Page 44: ...G6017366 03 2 FA1 11N ...
