19
Part Names and Functions
fig.25
DELAY TIME
This shows the unit of time for the
currently selected delay time (or
BPM unit).
When MODE is set to SOS, it indicates
the remaining memory (%) during
recording and the loop phrase position
during playback and overdubbing.
ON/OFF Pedal
Each press of the
pedal switches the
effects on or off.
With MODE set to
WARP or TWIST,
pressing on the pedal
produces the
corresponding effect.
ON/OFF
Indicator
This lights up when
effects are on.
DUAL Indicator
(SHORT, LONG)
Indicates the delay time as well
as the delay (SHORT, LONG)
when the DD-20 is set to DUAL
mode.
Output Mode Indicator
(A:EFX, B:DIR, +4dB)
“Setting the Output
Mode” (p. 30)
Tempo Type Indicator
( )
“How to Use the Tempo
Function” (p. 26)
Control Pedal Function
Indicator
(ON/OFF, TAP, MEM)
“Setting the External Pedal
Function” (p. 31)
POWER
Indicator
This lights up when
the power is on.
MEMORY Indicator
This is lit when the
MEMORY/TAP pedal is used
for switching between
MANUAL and memories (1–4).
TAP Indicator
This is lit when the
MEMORY/TAP pedal is used
for Tap Input.
MEMORY/TAP Pedal
This pedal performs two functions, as a
“Memory Pedal” used for switching
between MANUAL and memories (1–4),
and for “Tap Input” of the delay time.
“MEMORY/TAP Pedal Operation”
(p. 14, 15)
3
3
Display
When the power is turned on, the backlighting comes on, then
goes off again after approximately twenty seconds. This feature is
intended to prevent unnecessary battery drainage. If you want to
keep the backlighting on, simultaneously press the TAP button and
TEMPO button; the light then stays on.
* Remember to check on battery power consumption.
* Never strike or apply strong pressure to the display.
Summary of Contents for Giga Delay DD-20
Page 40: ...40 Setting Memo fig 36 fig 36 fig 36 ...
Page 44: ...G6017366 03 2 FA1 11N ...
