25
How to Use Each Mode
How to Use MODULATE
You can change the MODULATE modulation rate and depth settings.
1.
Turn the MODE knob to “MODULATE.”
2.
Hold down the ON/OFF pedal until “r” appears in the display.
The rate value appears next to the “r” in the display.
fig.37
3.
You can change the rate value by continuing to hold down the ON/OFF pedal
as you turn the DELAY TIME knob.
4.
Hold down the ON/OFF pedal and turn the DELAY TIME knob to have “d”
displayed.
The depth value appears next to the “d” in the display.
* Press the DELAY TIME knob once more to have “r” displayed.
fig.37
5.
You can change the depth by continuing to hold down the ON/OFF pedal as
you turn the DELAY TIME knob.
* This is set at the factory to “r:80, d:70.”
* This setting is preserved even after the power is turned off. If you want to save it as a
setting for the Memories (1–4), then carry out the Write procedure (p. 10).
Press
Summary of Contents for Giga Delay DD-20
Page 40: ...40 Setting Memo fig 36 fig 36 fig 36 ...
Page 44: ...G6017366 03 2 FA1 11N ...
