24
How to Use Each Mode
How to Use DUAL
Although DUAL mode features a short delay and long delay connected in series,
you can change the delay time for the short delay.
1.
Turn the MODE knob to “DUAL.”
2.
Hold down the ON/OFF pedal until “SHORT” appears in the display.
In this case, the short delay’s delay time is indicated.
fig.36
3.
You can change the delay time by continuing to hold down the ON/OFF pedal
as you turn the DELAY TIME knob.
* This is set at the factory to “SHORT 50msec, LONG 300 msec.”
* This setting is preserved even after the power is turned off. If you want to save it as a
setting for the Memories (1–4), then carry out the Write procedure (p. 10).
Summary of Contents for Giga Delay DD-20
Page 40: ...40 Setting Memo fig 36 fig 36 fig 36 ...
Page 44: ...G6017366 03 2 FA1 11N ...
