Boss BR-864 Owner'S Manual Download Page 80

Page: 80 / 200

Editing the performance on a track (Track Editing)

fig.02-341d

Turn the TIME/VALUE dial to select “AB” and press

[ENTER].

fig.02-342d

Use CURSOR [

] [

] and the TIME/VALUE dial to

select the track/V-Track to erase from.

When you are ready to execute the erasure, press [ENTER].

The display will ask “Are you sure?,” so that you can
confirm the operation.

Press [ENTER].

The erasure is executed.

Press [UTILITY] (or press [EXIT] repeatedly) to return

to the Play screen.

* During updating, “Keep power on!” appears in the upper line

of the display, while the lower line shows what is being
processed.

Erasing by specifying the time
(TME/MES)

Perform the procedure given below to erase the portion
between specific times.

fig.02-343

Press [UTILITY].

Press CURSOR [

] [

] to move the cursor to “TRK,”

and press [ENTER].

fig.02-334d

Press CURSOR [

] [

] to move the cursor to “ERS,”

and press [ENTER].

fig.02-345d

Turn the TIME/VALUE dial to select “TME/MES” and

press [ENTER].

fig.02-346d

START

END

Time

Summary of Contents for BR-864









































































































































































































Search results

Summary of Contents for BR-864

Reviews:

Boss BR-864, Owner'S Manual, Page: 80 / 200

Search results

Summary of Contents for BR-864

Reviews: