Boss BR-864 Owner'S Manual Download Page 48

Page: 48 / 200

Recording

Recording Operations

Press [REC MODE] repeatedly until “INPUT” is
indicated for REC MODE at the left of the screen.

fig.01-109d

Press [REC].

[REC] flashes in red and the BR-864 enters the recording
standby state.

fig.01-110

Press [PLAY].

The [REC] and REC TRACK buttons stop flashing in red
and instead light solidly, and recording starts.

fig.01-111

When you finish recording, press [STOP].

The REC TRACK button lights alternately in orange and
green, indicating that track contains recorded data.

* You cannot play back sounds recorded for less than one

second.

* During updating, “Keep power on!” appears in the upper line

of the display, while the lower line shows what is being
processed.

* The following operations cannot be used, or are disabled, while

the recorder is in use (during recording and playback).

• Recording patterns

• Editing arrangements

• Selecting drum kits

• [USB]

• [TONE LOAD]

• Switching to the SONG SELECT screen

• Switching to the SONG NEW screen

• Switching to the SONG INFORMATION screen

• Switching to the SONG EDIT screen

• Track Editing

• Switching to the SYNC screen

• Switching to the INITIALIZE screen

Flash

Lit

Summary of Contents for BR-864









































































































































































































Search results

Summary of Contents for BR-864

Reviews:

Boss BR-864, Owner'S Manual, Page: 48 / 200

Search results

Summary of Contents for BR-864

Reviews: