manualshive.com logo in svg

Boss BR-864, Owner'S Manual, Page: 66 / 200

Share
Download
Boss BR-864 Owner'S Manual Download Page 66

66

Mastering

7.

Press CURSOR [

] [

] and turn the TIME/VALUE 

dial to select the Mastering Tool Kit bank and number.

“Mastering Tool Kit Patch List” (separate sheet)

8.

Press [EXIT] to return to the Play screen.

9.

Press [REC].

[REC] flashes in red and the BR-864 enters the recording 
standby state.

fig.01-804

10.

Press [PLAY].

The [REC] and REC TRACK buttons stop flashing in red 
and instead light solidly, and recording starts.

fig.01-805

11.

When you finish mastering, press [STOP].

* During updating, “Keep power on!” appears in the upper line 

of the display, while the lower line shows what is being 
processed.

Editing the Mastering Tool Kit 
settings

To create a new patch, select the patch that most closely 
resembles the sound you have in mind from the effects 
patches already stored in the unit, then edit its settings.

If you wish to save the effect settings that you edited, save 
them as a user patch or song patch.

1.

Carry out Steps 1–6 from p. 65, and switch to Mastering 
mode.

The Mastering Tool Kit selection screen appears.

fig.01-806d

2.

Select a Mastering Tool Kit.

Use CURSOR [

] [

] and the TIME/VALUE dial to 

select the Preset/Song/User and number.

3.

Press CURSOR [

] to move the cursor to “EDIT,” and 

press [ENTER].

The display switches to the Mastering Tool Kit Edit 
screen, which shows the algorithm (the effects used, 
shown in the sequence they are connected).

fig.01-807d

You can also display this screen directly by pressing 
[ENTER] while the cursor is positioned at the Preset/
Song/User or number.

Flash

Lit

P: Preset / S: Song / U: User

Number

Bank

Patch Name

Algorithm
Name

Summary of Contents for BR-864









































































































































































































Reviews:

No comments