Boss BR-864 Owner'S Manual Download Page 108

Page: 108 / 200

108

About the drum kits

Erasing drum sounds

Press [TONE LOAD].

Press CURSOR [

] [

] to move the cursor to

“ERASE,” and press [ENTER].

fig.03-523d

Turn the TIME/VALUE dial to specify the erase drum
kit, then press [ENTER].

S1–5:

Song Drum Kit 1–5

fig.03-524d

Turn the TIME/VALUE dial to specify the erase drum
sound, then press [ENTER].

* Select “ALL” if you want to erase all of the drum sounds in

the kit.

fig.03-525d

“Are you sure?” appears.

Press [ENTER] (YES) to erase the drum sound.

To cancel, press [EXIT] (NO).

Once the erasing is complete, the beginning screen for
Tone Load is returned to the display.

Press [TONE LOAD] (or [EXIT]) to return to the Play
screen.

Changing the position (pan) of
the drum sounds

Press [TONE LOAD].

Press CURSOR [

] to move the cursor to “PAN,” and

press [ENTER].

fig.03-526d

Turn the TIME/VALUE dial to specify the drum kit
whose panning you want to change, then press
[ENTER].

S1–5:

Song Drum Kit 1–5

fig.03-527d

Use [CURSOR] and the TIME/VALUE dial to specify
the drum sound whose panning is being changed and
the pan setting.

fig.03-528d

* When you press [RHYTHM PAD], causing the indicator to

light/flash, you can then set the drum sounds by tapping REC
TRACK [1/5]–[4/8], [V-TRACK], and [TAP].

* Pressing [ENTER] sets this to “C00” (Center).

Press [TONE LOAD] (or press [EXIT] repeatedly) to
return to the Play screen.

Summary of Contents for BR-864









































































































































































































Search results

Summary of Contents for BR-864

Reviews:

Boss BR-864, Owner'S Manual, Page: 108 / 200

Search results

Summary of Contents for BR-864

Reviews: