Boss BR-864 Owner'S Manual Download Page 28

Page: 28 / 200

Listening to the demo songs

Moving through a song using hours,
minutes, seconds, frames, or sub frames

Press [

] [

] to move the cursor to hours, minutes,

seconds, frames, or sub-frames display, and turn the TIME/
VALUE dial to change the current time in the song.

Moving through a song in measures or
beats

The current position’s measure– beat–clock are displayed at
the location “MEAS” (measure) in the display.

* For the demo songs, a Arrangement (p. 35, p. 90) has already

been created and it is set so that measure, beat, clock, and song
is properly synchronized.

Press [

] [

] to move the cursor to “measure” or “beat”

display, and turn the TIME/VALUE dial to change the
current measure or beat in the song.

* you cannot move the cursor to Clock (cannot be altered).

(4) Turning off the power

Make sure that playback of the song is stopped.

Always make sure that the recorder is stopped before
turning off the power to the BR-864. Turning off the
power while recording or playback is in progress may
result in the deletion of (song) data, mixer settings, and/
or effect patch data.

Turn off the power to each device in the reverse order

used for powering up (p. 25).

Turn the BR-864’s POWER switch off.

Summary of Contents for BR-864









































































































































































































Search results

Summary of Contents for BR-864

Reviews:

Boss BR-864, Owner'S Manual, Page: 28 / 200

Search results

Summary of Contents for BR-864

Reviews: