Boss BR-864 Owner'S Manual Download Page 145

Page: 145 / 200

145

Synchronizing with MIDI devices

Section 5

fig.05-410d

Press CURSOR [

] [

] to select “MMC Master,” and

turn the TIME/VALUE dial to set the MMC mode.

fig.05-411d

OFF:

MMC will not be transmitted.

MASTER:

MMC information is sent. The BR-864 becomes
the master of the external MIDI instrument.

* For details on the MMC functionality supported by the BR-

864, read “MIDI Implementation” (p. 185).

Press CURSOR [

] [

] to select “Sync Gen,” and

turn the TIME/VALUE dial to set “MTC.”

Make settings on your sequencer software.

Make the following settings on your sequencer software.
For details on making these settings, refer to the manual
for your sequencer software.

MTC:

receive

MTC type:

same setting as the MTC Type selected on the

BR-864

MMC:

receive

Press [UTILITY] (or press [EXIT] repeatedly) to return
to the Play screen.

* During updating, “Keep power on!” appears in the upper line

of the display, while the lower line shows what is being
processed.

Summary of Contents for BR-864









































































































































































































Search results

Summary of Contents for BR-864

Reviews:

Boss BR-864, Owner'S Manual, Page: 145 / 200

Search results

Summary of Contents for BR-864

Reviews: