Boss BR-864 Owner'S Manual Download Page 36

Page: 36 / 200

Recording/playing back a song

Preset Arrangements (P)

The preset arrangements contain preset data.
Their settings cannot be changed, and you cannot create
a new preset arrangement.

Song Arrangements (S)

Song arrangements can be written; however, the data for
song arrangements are stored along with the song data
to the memory card.

fig.00-420

Press [EXIT] to return to the Play screen.

Changing patterns

Press [ARRANGE/PATTERN/OFF] repeatedly until the
indicator is flashing.

fig.00-420a

Select a pattern.

Use CURSOR [

] [

] and the TIME/VALUE dial to

select the Preset/Song and number.

fig.00-420bd

Preset Patterns (P)

The preset patterns contain preset data.
Their settings cannot be changed, and you cannot create
a new preset pattern.

Song Patterns (S)

Song patterns can be written; however, the data for song
patterns are stored along with the song data to the
memory card.

fig.00-420c

Press [EXIT] to return to the Play screen.

Changing the tempo of the
arrangements or patterns

You can temporarily change the tempo of the arrangement or
pattern being played by carrying out the following
procedure while the Play screen is displayed.

* The arrangement’s tempo setting is temporarily disabled.

Press CURSOR [

] [

] and align the cursor up with

“TEMPO” in the display.

Rotate the VALUE dial to adjust the tempo.

fig.00-421d

* The change in tempo is only temporary. If you want to change

the arrangement’s actual tempo, refer to p. 93.

* Tempos cannot be saved to patterns.

Tapping to change the tempo of
the arrangements or patterns

You can temporarily change the tempo of the arrangement or
pattern by the timing with which you press [TAP].

Tap on [TAP] four or more times to change the tempo of the
arrangement or pattern. The tempo becomes that in which
you tapped.

* The arrangement’s tempo setting is temporarily disabled.

fig.00-422

* The change in tempo is only temporary. If you want to change

the arrangement’s actual tempo, refer to p. 93.

* Tempos cannot be saved to patterns.

Memory Card

BR-864

SONG

Song

Arrangement

Preset

Arrangement

P: Preset / S: Song

Pattern Name

Number

Memory Card

BR-864

SONG

Song

Pattern

Preset

Pattern

Tempo

Summary of Contents for BR-864









































































































































































































Search results

Summary of Contents for BR-864

Reviews:

Boss BR-864, Owner'S Manual, Page: 36 / 200

Search results

Summary of Contents for BR-864

Reviews: