Boss BR-864 Owner'S Manual Download Page 148

Page: 148 / 200

148

Initializing the BR-864’s settings

Initializing the effect settings

Follow the procedure below to initialize the user effect patch
or song effect patch.

A list of the initial settings for each parameter is given in
the “Parameter List” (p. 178).

Press [UTILITY].

Press CURSOR [

] [

] to move the cursor to “INI,”

and press [ENTER].

fig.05-605d

Press CURSOR [

] [

] to move the cursor to

“U EFX” (user patch) or “S EFX” (song patch), and press

[ENTER].

The confirmation message “Are you sure?” appears in
the display.

(Example) when you select “U EFX”

fig.05-606d

To continue the initialization, press [ENTER] (YES).

To cancel, press [EXIT] (NO) (or [UTILITY]).

When [ENTER] is pressed, initialization begins.

After the initialization has been completed, you are
returned to the Play screen.

Initializing the Rhythm Guide
Arrangements/Patterns/Drum Kits

This initializes the Rhythm Guide Arrangements, Patterns,
and Drum Kits.

• In Step Arrangement, Step 1 is set to the metronome.

• In song patterns and song drum kits, the step is empty.

Press [UTILITY].

Press CURSOR [

] [

] to move the cursor to “INI,”

and press [ENTER].

fig.05-607d

Press CURSOR [

] [

] to move the cursor to “RHY,”

and press [ENTER].

The confirmation message “Are you sure?” appears in
the display.

fig.05-608d

To continue the initialization, press [ENTER] (YES).

To cancel, press [EXIT] (NO) (or [UTILITY]).

When [ENTER] is pressed, initialization begins.

After the initialization has been completed, you are
returned to the Play screen.

Summary of Contents for BR-864









































































































































































































Search results

Summary of Contents for BR-864

Reviews:

Boss BR-864, Owner'S Manual, Page: 148 / 200

Search results

Summary of Contents for BR-864

Reviews: