manualshive.com logo in svg

Boss BR-864, Owner'S Manual, Page: 1 / 200

Share
Download
Boss BR-864 Owner'S Manual Download Page 1

 

Owner’s Manual

 

**********

          1*SX

 

Thank you, and congratulations on your choice of the BOSS
BR-864 8-Track Digital Studio.

Before using this unit, carefully read the sections entitled:

 

• USING THE UNIT SAFELY (page 2–3)

• IMPORTANT NOTES (page 4–5)

 

These sections provide important information concerning
the proper operation of the unit. 

Additionally, in order to feel assured that you have gained a 
good grasp of every feature provided by your new unit, 
Owner’s manual should be read in its entirety. The manual 
should be saved and kept on hand as a convenient reference. 

 

Copyright © 2003 BOSS CORPORATION

 

All rights reserved. No part of this publication may be reproduced in any form
without the written permission of BOSS CORPORATION. 

 

■

 

 Printing Conventions in This Manual

 

• Text or numerals enclosed in square brackets [   ] indicate buttons.

 

[PLAY]

 

PLAY button

 

[REC]

 

REC button

• Reference such as (p. **) indicate pages in this manual to which

you can refer.

Summary of Contents for BR-864









































































































































































































Reviews:

No comments