Bosch Servodyn-D Series Manual Download

Page: 55 / 84

DSS user interface

4–14

1070 066 091-102 (01.08) GB

4.6.3

Load main memory

This command loads all data stored in the FEPROM to the drive’s RAM.
When switched on, or if the ”RESET” button at the inverter has been de-

pressed, the drive automatically copies all data contained in the FEPROM to

the RAM.

CAUTION

The main memory of the drive is overwritten!

All data in the RAM will be replaced with the parameters contained

in the FEPROM by the ”Load main memory” command. This process

cannot be reversed.

If you are not sure whether you still need the old RAM data, please

contact your systems administrator before executing this command.

Switch the drive to phase 2.

Select the menu sequence

CONTROL

LOAD MAIN MEMORY

– or –

LOAD MAIN MEMORY in the ”Overview” window.

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Summary of Contents for Servodyn-D Series





















































































Search results

Summary of Contents for Servodyn-D Series

Reviews:

Related manuals for Servodyn-D Series

Brands by name

Popular brands

Bosch Servodyn-D Series, Manual

Search results

Summary of Contents for Servodyn-D Series

Reviews:

Related manuals for Servodyn-D Series

Brands by name

Popular brands