manualshive.com logo in svg

Bosch Servodyn-D Series, Manual

Share
Download
Bosch Servodyn-D Series Manual Download Page 76

Diagnostics

8–3

1070 066 091-102 (01.08) GB

Configuring cyclic data

You may influence:

D

the cycle time (time base for transmitting messages to the drive),

D

the refresh rate of screen displays, and

D

the contents of the cyclic display in the ”Actual values” area of the module

status display

L

Select the menu sequence
EXTRAS 

"

 PREFERENCES 

"

 ”Cyclic” tab.

(1)

L

Enter the parameter number to be cyclically displayed in area (1).

Although you may enter any available parameter in the fields, only those pa-

rameters make sense whose value changes with time.

CAUTION

The PC may respond very slowly to user activities!

Times that have been selected too short in the ”Update period” field

may lead to a very slow response, especially if slow computers are

used. 

You should not use times of less than 2000 ms unless particularly fre-

quent updates of the display are absolutely necessary.

L

Hitting ”Apply” will immediately activate all changes, ”OK” will furthermore

close the dialog.

.

For a cyclic display of parameters in different windows, refer to page

8–5.

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Summary of Contents for Servodyn-D Series





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands