Bosch Servodyn-D Series Manual Download

Page: 72 / 84

Test and optimization

7–3

1070 066 091-102 (01.08) GB

7.1.2

DSS tools

In order to change the parameters, you should use the ”Speed controller”

and ”Band stop filter” thematic areas of the DSS expert. Select:
EXTRAS

DSS EXPERT

The current parameter setting will now be read from the drive for all thematic

areas of the DSS expert. Wait until this process has been completed.

The drive is now in phase 2.

In order to process the parameters of the ”Speed controller” and ”Band stop

filter” thematic areas, click on the area in question and select EDIT from the

pop-up menu.

Detailed information speed controller

0000.0

Double click on the input field to be modified, and enter the desired values.

The ”Parameter info” field now shows the parameter name and the admissi-

ble input range.

Apply:

transfers the current values to the drive. They will become im-

mediately active. The drive is now in phase 4.

OK:

as ”Apply”. The dialog is closed.

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Summary of Contents for Servodyn-D Series





















































































Search results

Summary of Contents for Servodyn-D Series

Reviews:

Related manuals for Servodyn-D Series

Brands by name

Popular brands

Bosch Servodyn-D Series, Manual

Search results

Summary of Contents for Servodyn-D Series

Reviews:

Related manuals for Servodyn-D Series

Brands by name

Popular brands