60/92
Commissioning
Bosch Rexroth AG
, WS200, DCA_DE_000151/10-2013
1
Hydraulic fluid
2
Funnel
3
Filler neck
4
End cap with ventilation opening
5
Maximum hydraulic fluid level (6.2 liters)
6
Minimum hydraulic fluid level (5.2 liters)
Fig. 42:
Filling the hydraulic power unit
How the hydraulic power unit is filled:
Clean the environment of the filler inlet.
Unscrew the end cap.
Put the funnel into the filler neck.
CAUTION
Risk of injury!
Slip hazard due to leaked hydraulic fluid.
Immediately bind/dispose of leaked hydraulic fluid.
Provide binding material before the filling, re-filling or exchange of hydraulic fluid.
Fill in 6.2 liters of hydraulic fluid (fig. 42: Maximum hydraulic fluid level).
Only refill hydraulic fluid if the liquid level has fallen to the minimum level:
Close the filler neck by means of the end cap.
Dispose of oil-contaminated cleaning cloths and binding agents according to the national
regulations in your country and/or your company-internal specifications/procedures.
For more information on the handling of hydraulic fluids refer to the data sheet, chap. 15.1.
Summary of Contents for Rexroth WS200
