Bosch Rexroth IPC 40.2, Project Planning Manual

Page: 29 / 82

IPC 40.2 Display and Operating Components
6-1
DOK-SUPPL*-IPC*40.2***-PR02-EN-P
6 Display and Operating Components
6.1 Monitor and Keyboard
To display and operate the IPC 40.2 we recommend the displays
VDP 16.1, VDP 40.1 and VDP 60.1 especially designed by Bosch Rexroth
for industrial applications. The displays are connected with the IPC 40.2
via the GIGASTAR interface. As an alternative, the IPC 40.2 can also be
equipped with a GIGABIT interface to connect the Rexroth operator
panels BF 312T and BF 315T or a GIGABIT3 interface to connect the
displays BTT 16.1 or BTT 40.1. These displays/operator panels are
equipped either with a keypad or with a touch screen with varying display
seize.
Note: Detailed information you will find in the corresponding
documentation.
You can also connect a standard monitor (female connector XVGA), a
PS2 keyboard (female connector XKeyb.) and a PS2 mouse (female
connector XMouse) with the IPC 40.2.
Note: If a BTT or VDP is used, keyboard and mouse may only be
connected to this displays. The keyboard and mouse
interfaces at the IPC 40.2 must not be used.