RE 63124-B, Edition: 08.2021, Bosch Rexroth AG
Safety instructions |
Press modules Type IH04 15/56
2.7 Personal protective equipment
During maintenance work as well as during installation and removal of the press
module, always wear the following personal protective equipment:
• Heat- or cold-resistant protective gloves
• Ear protection
• Safety shoes
• Perfectly fitting safety goggles
• Protective helmet
2.8 Information of the machine manufacturer
The machine manufacturer must provide the following information:
• the intended use for which the machine is designed
• the frequency of inspection and functional testing of the non-separating guards
and the indicators
• the necessary maintenance of the guarding
• the procedures required for maintenance and/or repair, especially if guarding has
been rendered ineffective
• a list of safety-relevant components, which must not be modified or replaced by
the machine end-user
• the intervals for the replacement of safety-relevant components
• the frequency of checking for external leakage
• the frequency and procedure for testing the function of the hydraulic system to
detect internal leakages
• the maximum weight and the maximum dimensions of the tools which may used
for the press
2.9 Obligations of the machine end-user
The machine end-user of the press must provide training for personnel on a regular
basis regarding the following subjects:
• Observation and use of the machine manufacturer’s operating instructions
and the legal regulations
• Observation of the intended operation (incl. maintenance) of the press module
• Observation of factory security officers’ instructions and operating instructions of
the machine end-user
• Behavior in case of emergency
• Effects of an emergency stop, how to free a person who has become entrapped
in the die area, in particular as a result of bypassing or misuse of the safety
equipment or after an emergency stop has been triggered, see EN 289, par. 7.2.3
