RE 63124-B, Edition: 08.2021, Bosch Rexroth AG
Safety instructions |
Press modules Type IH04 13/56
WARNING
Resonance or fluid noise, e.g. loud whistling and vibrations in case of
unfavorable arrangement of the press module in the press!
Danger of hearing damage! Material damage to the valves!
▶ Wear ear protection.
▶ In this case, contact a service engineer.
CAUTION
Hot surfaces at press modules, e.g. at valves and valve solenoid coils!
Risk of burning!
▶ Avoid contact with the press module during operation.
▶ Only touch the surfaces of the press module with heat-resistant protective
clothing, e. g. gloves, or do not work at hot surfaces.
▶ Allow the valves to cool down sufficiently before touching them.
▶ Observe the protective measures of the system manufacturer.
▶ If necessary, attach protective covers.
Contact with hydraulic fluid!
Health hazard/impairment of health, e.g. eye injuries, skin lesions, poisoning due to
inhalation and swallowing!
▶ Avoid contact with hydraulic fluids.
▶ When dealing with hydraulic fluids, you must implicitly observe the safety
instructions of the hydraulic fluid manufacturer.
▶ Use your personal protective equipment, e. g safety goggles.
▶ If however hydraulic fluid comes into contact with the eyes or enters the
bloodstream or is swallowed, consult a doctor immediately.
Slip hazard due to oily surfaces!
Risk of injury!
▶ Protect and mark the danger zone.
▶ Immediately remove leaked hydraulic fluid.
▶ Use an oil binding agent in order to bind the leaked hydraulic fluid.
▶ Remove and dispose of the contaminated oil binding agent, see chapter 13
▶ Wear the protective equipment, e.g. safety shoes, prescribed for your activity.
