RE 63124-B, Edition: 08.2021, Bosch Rexroth AG
Operation |
Press modules Type IH04 33/56
9 Operation
WARNING
Uncontrolled movement of the press!
Danger to life! Risk of injury! Damage to property!
▶ Ensure that the braking distance and stopping time for light curtains,
two-hand control devices and interlocking guards without guard locking are
checked at least once a year, see EN 289, par. 7.2.5 (Operator responsibility).
NOTICE
Wear and malfunctions caused by contaminated hydraulic fluid!
Damage to property!
▶ Ensure regular filtration of the hydraulic fluid to avoid contamination that
has a detrimental effect on the safety-relevant functions of the hydraulic system,
see EN 289, par. 5.3.7 (operator responsibility).
Information on operating the press module can only be provided in connection
with the machine/system. For this information, please refer to the operating
instructions of the overall machine/system.
Pay attention to the various operating modes and their effects and/or protective
measures, see EN ISO 16092-1, appendix E.
The press module is designed as follows:
• for the operating modes set-up, jog mode, single stroke and automatic mode
• for production with manual or automatic loading and unloading above 10 mm/s
• for slow closing speed with hold-to-run device below 10 mm/s (optional and only
for press modules type C and E)
• for a temporary muting of the safety functions according to EN ISO 16092-1,
par. 5.4.2 (optional and only for press modules type-C and D)
