1
2
1
2
EN
GLISH
R320103174/2018-08 | Function modules
Bosch Rexroth AG
21/30
9 Electrically connecting the function module
Fig. 18:
Electrically connecting the product
WARNING
Risk of electrical shocks due to contact with live parts!
Severe personal injury or even death.
f
Before commencing any electrical installation work, switch off the power supply and secure it against
reactivation.
f
Follow the safety instructions given in the documentation for the controller used.
f
Observe the safety regulations for working with high-voltage equipment!
1.
Keep the documentation for the motor/controller at hand.
2.
Lay the motor cable
(1)
at a distance from the encoder cables
(2)
!
10 Start-up
X
The product must not be put into service until it has been verified that the final product (for example a machine
or system) into which the Rexroth product has been installed complies with the country-specific requirements,
safety regulations and standards for the application.
Refer to the “Start-up” section for the functional check!
!
10
8.2
Mounting the motor
Mount the motor onto the gear unit
!
refer to the enclosed instructions for the gear unit.
