24/30
Bosch Rexroth AG
Function modules | R320103174/2018-08
12 Maintenance and repair
The only maintenance required is lubrication of the Ball Runner Block using a commercially available manual
grease gun.
Basic lubrication is carried out by the manufacturer.
The bearings are greased for life and should not require relubrication under normal operating conditions.
11 Operation
WARNING
Risk of electrical shocks due to contact with live parts!
Severe personal injury or even death.
f
Before commencing any electrical installation work, switch off the power supply and secure it against
reactivation.
Risk of electrical shocks due to contact with live parts!
Severe personal injury or even death.
f
Before commencing any electrical installation work, switch off the power supply and secure it against
reactivation.
Dangerous movements! Risk of fatal or severe injury or property damage!
Do not stay in the product's range of movement.
Prevent persons from inadvertently entering the danger zone.
Never carry out maintenance work on running machines.
Secure the system against restart and unauthorized use during maintenance work.
The product must be securely fastened in the system or in the machine!
The product is not self-locking; this means that if it is used vertically or at an angle, it can drop or move in an
uncontrolled way.
To prevent this, the machine builder or distributor must take protective measures by appropriate installation.
Amongst other sources, the Division Information Sheet on “Gravity-Loaded Axes” of DGUV Fachbereich Holz und
Metall, the Woodworking and Metalworking Division of the German statutory accident assurance association
(DGUV), offers further information on this topic.
CAUTION
Motor becomes very hot during operation!
Risk of burns.
f
During operation, do not touch the motor or only when wearing suitable protective equipment (e.g. heat-
resistant gloves).
NOTICE
Lubricant may escape during operation of vertical installations!
Environmental contamination.
f
Take suitable precautions to collect any escaping lubricant and dispose of it in the proper way.
Motor will overheat when overloaded!
Fire risk.
f
During operation, be sure to comply with technical data such as load capacities, moments, maximum rotary
speeds, motor data, etc.
!
catalog.
