EN
GLISH
R320103174/2018-08 | Function modules
Bosch Rexroth AG
23/30
10.4
Moving the sensor
CAUTION
Risk of electrical shocks due to contact with live parts (24 V)!
Risk of minor injuries.
f
Before commencing work on any sensors, switch off the power supply and secure it against reactivation.
Moving the sensors
X
If switching errors occur during the functional check / test run, reset the sensors
!
The cables are molded with inductive sensors. If necessary, we recommend a repurchase.
Fig. 20:
Moving the carriage
10.3
Trial run, running in
WARNING
Risk of injury due to moving parts (e.g. carriage)!
Crushing.
f
Do not attempt to grasp any moving parts while the system is in operation.
Risk of burns due to hot surfaces! Temperatures above 60 °C possible
f
Avoid touching the hot surface of the carriage assembly.
f
After switching off the product, let hot surfaces cool down before touching them.
f
Temperature-sensitive components must not touch the surface of the carriage assembly.
f
Pay attention to the mounting distance of the connecting cables and other components.
X
The product may only be put into service after running successful trials under near-real production conditions.
X
Move at low speed over the entire travel distance. While doing so, be sure to check the settings and the
function of the limit switches.
X
If necessary, optimize the interaction of the mechanical system and the electronics.
