52
Presented by Bob Pattengale
BOSCH MTS 5200 LAB SCOPE
1-800-71-TRAIN (1-800-718-7246) OR www.auto-video.com
Using the lab scope on the connected to the variable frequency signal terminal of the
demonstration board you can see that we have a waveform on the screen. Also note that the
voltage goes off of the screen. This is a good place where you may want to use the Signal Finder
function of the scope.
You can see in the screen capture above that by using the signal finder function the scope has
analyzed the top and bottom of the signal and has adjusted the display to get a better picture of
the waveform on the screen.
THE LAB SCOPE (SQUARE WAVE WITH & WITHOUT GLITCH)
