Bosch MSK030B-0900-NN, Project Planning Manual

Page: 14 / 282

MSKThe motors must only be used with the accessories specified
in this documentation. Components that are not explicitly men‐
tioned may neither be attached nor connected. The same is appli‐
cable for cables and lines.
Operation is only allowed in the explicitly mentioned configura‐
tions and combinations of the component and with the software
and firmware specified in the corresponding functional descrip‐
tion.
Any connected drive controller must be programmed before startup in order
to ensure that the motor executes the functions specifically to the particular
application.
MSKThe motors may only be operated under the assembly, mounting and in‐
stallation conditions, in the normal position, and under the environmental con‐
ditions (temperature, degree of protection, humidity, EMC etc.) specified in
this documentation.
2.2 Inappropriate use
Any use MSKof motors outside of the fields of application mentioned above
or under operating conditions and technical data other than those specified in
this documentation is considered as "non-intended use".
MSK motors may not be used if . . .
●
they are subject to operating conditions which do not comply with the
ambient conditions described above; for example, they may not be oper‐
ated under water, under extreme temperature fluctuations or extreme
maximum temperatures;
● the intended application is not explicitly released by Bosch Rexroth.
Please be absolutely sure to comply with the instructions given in the
general safety instructions!
Bosch Rexroth AG DOK-MOTOR*-MSK********-PR12-EN-P 12/279
Synchronous Servomotors MSK
Important instructions on use