Bosch MSK030B-0900-NN Project Planning Manual Download Page 255

Page: 255 / 282

12.4.2

Connecting the plug-in connector

Power, encoder connector

Proceed as follows to connect the threaded connectors:
1.

Place the power connector on the thread of the terminal box in the cor‐

rect position.

Tighten the cap nut of the power connector by hand. By feeding more

cable, the power connector can be brought up to its end position.

Tighten the cap nut up to the stop.

Only fully tightened cap nuts guarantee the specified protection

against water (IP65) and activate the vibration protection.

Set output direction (option "U")

For MSK motors, the output direction of the connected power and encoder

cables can be set with the option Electrical connection "U". The adjustable

flange sockets can be rotated in a range of 240°, see

chapter 8.4 "Plug con‐

nector, rotatable" on page 196

The flange socket can be rotated if an appropriate plug-in connector has

been connected. The flange socket can be brought into the desired position

by hand due to the lever effect of the connected plug-in connector.
1.

Connect plug-in connector to flange socket

Move the flange socket in the desired output direction by turning the

connected plug-in connector.

Do not use any tools (e.g. pliers or screwdrivers) to turn the motor

flange socket. Mechanical damage to the flange socket by tools

cannot be ruled out.

The desired output direction is set.

Each rotation of the flange socket reduces the holding torque in

the set position. Change the output direction no more than 5

times.

Select output direction (option "A,

B, L, R")

The output direction of the connected power cables can be selected for MSK

motors with the option Electrical connection "A, B, L, R" when ordering. The

output direction of the encoder connectors cannot be changed for these mo‐

tors.

DOK-MOTOR*-MSK********-PR12-EN-P

Bosch Rexroth AG

253/279

Synchronous Servomotors MSK

Installation

Summary of Contents for MSK030B-0900-NN



























































































































































































































































































Search results

Summary of Contents for MSK030B-0900-NN

Reviews:

Brands by name

Popular brands

Bosch MSK030B-0900-NN, Project Planning Manual

Search results

Summary of Contents for MSK030B-0900-NN

Reviews:

Brands by name

Popular brands