10 | Analog and Frequency Inputs
54 / 120
Modular Sensor Interface MSI 60
Bosch Motorsport
– Measurement labels with the characters ‘_fi’ show filtered values.
– The word ‘name’ in the table is a placeholder for the channel’s name.
Measurement label
Function
raw_name
mV value of sensor
raw_name_fi
filtered mV value of sensor
name
physical value of sensor
name_fi
filtered physical value
Filtered channels are routed through digital low pass filters:
– MSI 60 uses A/D converter oversampling and digital filtering to recording rate.
– Digital filters eliminate ‘out-of-band’ noise.
– Cut-off frequency automatically adjusted to recording rate.
– Linear phase – no signal distortion.
– Latency compensation – no filter delay in recorded data.
10.3 Configuring Inputs
This chapter describes how to configure the Input Sensors.
10.3.1 Configuring a predefined Bosch Sensor with the
‘Bosch Sensor Wizard’
1.
Click on ‘Measurement Sources’ in the Toolbox.
