manualshive.com logo in svg

Bosch IUI-MAP0001, User Manual, Page: 10 / 60

Share
Download
Bosch IUI-MAP0001 User Manual Download Page 10

10

en | Operation

MAP Control Center

F.01U.168.328 | 03 | 2011.05

User guide

Bosch Security Systems, Inc.

2

Operation

2.1

Alarm Tasks

2.1.1

Silence Alarms

If the system generates an alarm, press the touch screen and enter your passcode (Figure 1.3, 

Page 7). If the system accepts your passcode, the touch screen shows the External Intrusion 

Alarm screen (Figure 2.1, Page 10).

Figure 2.1

External Intrusion Alarm screen

To silence the alarm, press Silence. If the system recorded more than one alarm, the screen 

shows the first and last alarms. Press View More to see events in the event memory. For more 

information about event memory, refer to Section 2.1.3 View Event Memory, page 10.

2.1.2

Clear Alarms

After silencing an alarm, the user must clear the alarm. From the alarm screen (Figure 2.1, 

Page 10), press View More to open the View Event Memory screen (Figure 2.2, Page 10). To 

clear the alarm, press Clear Events.

2.1.3

View Event Memory

If the Information button on the Main Menu (Figure 1.5, Page 8) flashes red or yellow, press 

the Information button to view the View Event Memory screen (Figure 2.2, Page 10). For 

additional event memory options, refer to Section 2.10 Event Memory, page 55.

Figure 2.2

View Event Memory screen

Summary of Contents for IUI-MAP0001





























































Reviews:

No comments