![background image](http://html.mh-extra.com/html/bosch/iui-map0001/iui-map0001_user-manual_50335037.webp)
MAP Control Center
Operation | en
37
Bosch Security Systems, Inc.
User guide
F.01U.168.328 | 03 | 2011.05
Figure 2.58
View Device Status Detail screen
2.7.3
Bypass/Unbypass Device
To arm the system, regardless of a particular device’s status, the user can bypass that device.
For example, if a window contact is installed on a window that the user wants to leave open,
the user can bypass that window contact point. This allows the user to arm the system even
though the window contact point’s status is Active.
From the Status menu (Figure 2.45, Page 32), press Bypass/Unbypass Device. The Bypass/
Unbypass Device screen (Figure 2.59, Page 37) lists the devices and displays whether each
device is either:
–
Bypassed (
), or
–
Unbypassed (
).
Press a device’s on-screen button to change its bypass status.
Figure 2.59
Bypass/Unbypass Device screen
NOTICE!
A device cannot be bypassed if the area containing the device is armed, there is an active
event in the system from the area containing the device, or if the device is in Walk Test.
NOTICE!
Bypassing a device only disables the device’s ability to notify the security system of an alarm
or trouble event. Tamper events are still active in a bypassed device.