20
| English
u
Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slip-
pery handles and grasping surfaces do not allow for safe handling and control of the
tool in unexpected situations.
Battery tool use and care
u
Recharge only with the charger specified by the manufacturer.
A charger that is
suitable for one type of battery pack may create a risk of fire when used with another
battery pack.
u
Use power tools only with specifically designated battery packs.
Use of any other
battery packs may create a risk of injury and fire.
u
When battery pack is not in use, keep it away from other metal objects, like pa-
per clips, coins, keys, nails, screws or other small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
u
Under abusive conditions, liquid may be ejected from the battery; avoid contact.
If contact accidentally occurs, flush with water. If liquid contacts eyes, addition-
ally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
u
Do not use a battery pack or tool that is damaged or modified.
Damaged or modi-
fied batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk
of injury.
u
Do not expose a battery pack or tool to fire or excessive temperature.
Exposure
to fire or temperature above 130°C may cause explosion.
u
Follow all charging instructions and do not charge the battery pack or tool out-
side the temperature range specified in the instructions.
Charging improperly or
at temperatures outside the specified range may damage the battery and increase the
risk of fire.
Service
u
Have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
u
Never service damaged battery packs.
Service of battery packs should only be per-
formed by the manufacturer or authorized service providers.
Safety Warnings for Screwdrivers
u
Hold the power tool by insulated gripping surfaces, when performing an opera-
tion where the fastener may contact hidden wiring.
Fasteners contacting a "live"
wire may make exposed metal parts of the power tool "live" and could give the oper-
ator an electric shock.
1 609 92A 5MN | (12.02.2020)
Bosch Power Tools
