Bosch DDU 10 Manual Download

Page: 147 / 188

Open Source Software (OSS) Declaration for the Display | 19

Bosch Motorsport

DDU 10

147 / 188

Redistribution and use in source and binary forms, with or without modification, are per-

mitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of con-

ditions and the following disclaimer.

Redistributions in binary form must reproduce the above copyright notice, this list of

conditions and the following disclaimer in the documentation and/or other materials

provided with the distribution.

All advertising materials mentioning features or use of this software must display the

following acknowledgement:

This product includes software developed by the University of California, Berkeley and

its contributors.

Neither the name of the University nor the names of its contributors may be used to

endorse or promote products derived from this software without specific prior written

permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY

DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SER-

VICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE

USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

19.6 BSD 3-Clause License (getsubopt)

The NetBSD getsubopt argument parsing function is used by Graphic Engine plugins to

parse plugin options.

Applies To:

libgre.dll, libgre.a

The Graphic Runtime engines used on most operating systems, including all Windows

platforms (win32).

Redistribution and use in source and binary forms, with or without modification, are per-

mitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of con-

ditions and the following disclaimer.

Redistributions in binary form must reproduce the above copyright notice, this list of

conditions and the following disclaimer in the documentation and/or other materials

provided with the distribution.

Summary of Contents for DDU 10





























































































































































































Search results

Summary of Contents for DDU 10

Reviews:

Related manuals for DDU 10

Brands by name

Popular brands

Bosch DDU 10, Manual

Search results

Summary of Contents for DDU 10

Reviews:

Related manuals for DDU 10

Brands by name

Popular brands