Recording and Telemetry | 17
Bosch Motorsport
DDU 10
133 / 188
17.4.3 Setting up car in WDServer
WDServer is a program used to capture data streaming from a transmitter and convert to
WinDarab; WDServer also creates a log of the data received over telemetry.
Car Settings
Add Car
WDServer Settings
1.
To set up a new car, select ‘Add Car’.
2.
In the Car settings tab, enter a name for the new vehicle.
This name will be used as a part of the file name for WDServer’s log of received tele-
metry data and will show up in WinDarab, when searching for the telemetry stream in
the Network folder.
You are now at the final step of configuring the telemetry stream. In order for the
data to be decrypted by WDServer, two *.ini files must be referenced by WDServer.
After the configuration is sent to the logger, these two different *.ini files will be cre-
ated in the base folder. You can find the base WDServer folder, if you right-click the
FM40 and select ‘Properties’. You can change this folder location for easier access if
desired.
