Display Configuration | 11
Bosch Motorsport
DDU 10
79 / 188
4.
The ‘shift light configuration’ window appears. Set up the shifting lights using the fol-
lowing configuration possibilities:
a)
b)
c)
d)
e)
f)
a) Choose the measurement channel for 'Revolution'. Revolution must have 1/min quantization.
b) Enter the limit value when the RPM hysteresis function is active. The RPM hysteresis function avoids
the high-frequent switchover of the measurement channel value.
c) Choose a predefined Pattern style.
d) Define the rpm thresholds to show the LED pattern.
e) Choose the measurement channel for 'Gear'. Gear must have an ASCII quantization (1st gear='1' = 49,
2nd gear='2' = 50, ...). (ASCII quantization is standard for the 'gear' channel of Bosch ECUs.
If you get the gear information of a different control unit as the Bosch ECU (e.g. a gearbox control unit),
use the Gear Lookup Table to translate numeric values to ASCII format.
For more information see chapter "Converting a gear channel to ASCII representation".)
f) Click with the right mouse button on the LEDs to reconfigure the LED patterns.
5.
Click ‘OK’ when done. The configuration is displayed in the DDU 10 LED Configuration
window.
11.5.2 Converting a gear channel to ASCII representation
If you get the gear information of a different control unit as the Bosch ECU (e.g. a gearbox
control unit), use the Gear Lookup Table to translate numeric values to ASCII format.
1.
Click on the ‘Measurement Sources’ button in the Toolbox.
2.
Drag the ‘Gear Lookup Table’ symbol and drop it on the ‘Computed Channels’ folder.
Drag + Drop
Measurement
sources
The Gear Lookup Table Wizard appears.
Gear Lookup Table Wizard
1.
Set up the settings as shown in the screenshot.
