11 | Display Configuration
82 / 188
DDU 10
Bosch Motorsport
The configuration is displayed in the DDU 10 LED Configuration window.
11.5.4 Assigning display pattern priority
You can assign the priority of the created display pattern and shift lights.
The pattern with a higher priority will always cover patterns with a lower priority, when it
becomes active. If a transparent (grey) LED is used in a pattern, the LEDs of lower patterns
will be visible. Please ensure that for example shift lights do not cover important warnings.
Click the ‘Move up’ or ‘Move down’ button to change the priority. The pattern with the
lowest number will have the highest priority.
11.6 Page select / Display brightness / LED
brightness
Any “event” can be used to change the display and LED brightness or the display page.
Those events can be any input channel or an internal calculated channel. In the following
chapters, you will find some examples on how to set up such a configuration.
11.6.1 General information
To use a channel as a page switch, select “Channel based” as page switch and select the
channel you configure for a switch in the ‘display settings’ dialog (as described in the fol-
lowing chapters).
To use a channel as a brightness switch, check the box “Use a channel to switch bright-
ness” and select the channel you configure for a switch.
