1 689 989 485 | 2020-08-01
Robert Bosch GmbH
The vertical distance between the resting surface
and the front recess of the mounting adapter
must be
820 mm
.
4. If the vertical distance determined is not 820 mm:
use the knurled screws
(5)
to adjust the positioning
unit in such a way that the vertical distance
(2)
be‐
tween the resting surface
(3)
and the front recess
(4)
of the mounting adapter is 820 mm.
11
22
33
4
4
4712009-19_shd
5555
(1) Mounting adapter 1
(2) Vertical distance between resting surface and front recess of
mounting adapter
(3) Resting surface
(4) Front recess of mounting adapter
(5) Knurled screws for vertical adjustment of positioning unit
5. Loosen the screws
(2)
on the offset ruler
(1)
.
1
22
4712009-16_shd
(1) Offset ruler
(2) Offset ruler screws
6. Place the 0 point of the offset ruler precisely in the
height indicator
(2)
of the positioning unit.
11
4712009-18_shd
0
0
1
2
1
2
(1) Offset ruler
(2) 0 point of offset ruler precisely in height indicator of positioning
unit
7. Use the screws to secure the offset ruler.
---
4.4
Attaching the edge protection for the
contact plate (CTA 104-x)
Attach the edge protection to the trolley.
4712009-11_shd
---
4.5
Installing the holder for the laptop/
tablet
1. Push the setscrews for the laptop/tablet shelf
through the upper or lower 4 holes.
— Use the upper or lower 4 holes depending on the
height needed.
2. Attach the laptop/tablet shelf
(3)
with washers
(2)
and hex nuts
(1)
.
en | 24 | DAS 3000 S20
