1 689 989 485 | 2020-08-01
Robert Bosch GmbH
Denomination
Order number
Indicator bar
1 682 329 109
Camera beam
1 683 050 053
Mounting adapter 1 (2x)
1 685 720 380
Calibration board retainer R
1 685 720 384
USB stick with Bosch ADAS Positioning soft‐
ware
1 687 370 328
Calibration board (CTA 300-1)
1 681 098 011
Contact plate (CTA 104-1) with edge protec‐
tion and retaining hooks
1 681 320 090
Wheel holder (CTA 100-1) (2x)
1 688 120 190
Reference board (CTA 400-1) (2x)
1 681 098 013
Reference board fastening parts set
(CTA 400-1) (2x)
1 687 010 635
---
3.3
DAS 3000 S20 overview
4712009-01_shd
5
7
8
89
12
4
33
1
6
2
11
99
10
13
(1) Trolley
(2) 2-degree adjustment mechanism
(3) Positioning unit consisting of two positioning bars
(4) Calibration board retainer Y
(5) Calibration board retainer Z
(6) R position
(7) Indicator bar with slide
(8) Camera beam
(9) Cameras (2x) in camera beam
(10) Parked position for wheel holder (CTA 100-1)
(11) Brake for trolley
(12) Holder for laptop/tablet
(13) Handles for controlling the trolley
---
3.4
Accessory overview
4712009-02_shd
3
1
2
1
2
4
5
66
(1) Wheel holder (CTA 100-1)
(2) Reference board (CTA 400-1)
(3) Contact plate (CTA 104-1)
(4) Calibration board 1 681 098 011 (CTA 300-1)
(5) Safety adapter R
(6) Mounting adapter 1
---
3.5
Functional description
The following steps must be carried out to calibrate a
windshield camera or front radar sensor using the
DAS 3000 S20:
• Attach the calibration board specific to the manufac‐
turer to the DAS 3000 S20.
• Position the DAS 3000 S20 in front of the vehicle.
• Use ESI[tronic] 2.0 to calibrate the windshield cam‐
era or front radar sensor.
---
In the following, the basic steps for positioning
the DAS 3000 S20 in front of the vehicle will be
set out. The Bosch ADAS Positioning software
will guide the user through the alignment process
for the DAS 3000 S20 step by step.
---
Positioning in front of the vehicle using the wheel hub
as a reference point
Step 1
– Position the DAS 3000 S20 at the required dis‐
tance: to do this, attach the wheel holders (CTA 100-x)
to the right front wheel and left rear wheel. Use
Bosch ADAS Positioning to place the DAS 3000 S20 at
the vehicle-specific distance from the wheel hub.
DAS 3000 S20 | 21 | en
