Bosch Conettix D6100IPv6, Installation And Operation Manual

Page: 31 / 88

Ports, page 30. Set up the D6600/D6100IPv6 from Menu 2.2.27 CPU Programmable Input 1
for Input 1; Menu 2.2.28 CPU Programmable Input 2 for Input 2. Refer to the D6600/
D6100IPv6 Program Entry Guide (P/N: 4998122702) for more information.
Input Default Connection Configuration
–
The I/O ports work with dry contact outputs.
– The open circuit input voltage on the input measures between 9 V and 12 V.
– UPS Battery OK (restore) – contacts closed
– UPS Battery Low input – contacts open
You can apply other output sources to the input wiring as long as you follow these guidelines:
–
The maximum input voltage allowed without causing damage to the input is 24 VDC.
– For UPS “Battery OK” (restore), the input range must be between 0 V and 1 V.
– For UPS “Battery Low,” the input range must be between 3 V and 24 V.
i
Notice!
The programmable input voltage range is undefined for input voltages between 1 V and 3 V.
This might cause unexpected results such as toggling between “Battery Low” and “Battery
OK.” The input should be connected to logic level outputs.
Input Reverse Connection Configuration
If the input must be the opposite polarity for correct operation, place an external transistor
circuit between the UPS output signal and the D6600 I/O.
Follow these guidelines for correct operation:
–
The maximum input voltage allowed without damaging the input is 24 V.
– UPS Battery OK (restore) input range from the UPS operates between 5 V and 24 V.
– UPS Battery Low input range operates between 0 V and 0.5 V.
1
2
3
4
5
Figure 10.3: Input Wiring for Reverse Configuration
Callout
ᅳ
Description
1
ᅳ
From UPS Battery OK signal 5 to 24
2
ᅳ
22 k to 39 k
3
ᅳ
Battery Low signal 0 to 0.6 V
4
ᅳ
To I/O input
5
ᅳ
Any general purpose NPN transistor
Conettix Communications Receiver/
Gateway
Input and Output Ports | en 31
Bosch Security Systems, Inc. Installation and Operation Guide 2012.11 | 08 | 4998122704