Bosch BTM-XB, Operating Manual

Page: 72 / 124

The password can be entered with the numeric key block or with the cursor
and plus and minus keys. The entry must be confirmed with the menu key,
the radio switches to the basic display if the password was correct.
A false password can be corrected before you press the menu key then it
should be re-entered. After three wrong attempts, all further inputs are
barred for 15 minutes. The radio must be left on during the 15 minute bar.
The “Security Prompt when Switching On” menu item is logically outside the
normal operator menu always in first place and is only activated when the
radio is switched on.
Change the Password
This menu can only be used in connection with the security prompt. A pass-
word programmed in the after-sales service can be changed here.
After entering the old password in the top line, the new password can be
written in the bottom line; then press the menu key.
Attention! The “Change Password” menu may not be programmed in the
first position of the menu sequence otherwise operating errors
may easily occur (menu item 1 is always active in the backgro-
und even when the basic display is visible).
Compact Input
The status, call and channel can be changed with the “Compact Input” menu
item. The top line of the display (format C) contains the status on the left and
the channel number with a prefixed “c” for channel on the right. The current
call number is in the middle to the left of the channel. The input can be made
with the cursor key, plus and minus keys and the numeric key block.
72
GB
923991 19.10.1999 10:28 Uhr Seite 72