7.5 Symbols
used
Table 6: Symbols used
2
1
Connection with T-bolt and fl ange nut.
Make sure the T-bolt is in the correct position when inserting it into the slot
and tightening it. The notch at the head of the screw indicates the orientation
of the T-bolt.
1 = T-bolt insertion position in the slot.
2 = T-bolt clamping position in the slot.
Tightening torque: 25 Nm
M
D
SW13
= 20Nm
Hex wrench
SW = wrench size … mm
M
D
= required tightening torque ... Nm
M
D
= 8Nm
SW5
Hex socket wrench
SW = wrench size … mm
M
D
= required tightening torque ... Nm
PH3
PZ2
Screwdrivers for cross-head screws
PZ … = Pozidriv screw driver, size …
PH … = Phillips screw driver, size …
gleitmo 585 K Anti-Seize
Lubricate/lubricate with specifi c grease lubricant:
• gleitmo 585 K: gleitmo 585 K, www.fuchs-lubritech.com
• Anti-Seize: Food Grade Anti-Seize/Loctite 8014, www.henkel.com
GHD
V 68
Oil
Oil
Oil
Lubricate/lubricate with specifi c mineral oil:
• GHD: Structovis GHD, www.klueber.com
• V 68: Mineral oil with a viscosity of 68
Loctite 243
Loctite 601
Secure the screws with:
• Loctite 243: Medium strength (detachable), www.loctite.de
• Loctite 601: High-strength screw retention (non-detachable), www.loctite.de
The marked parts are not required for the described assembly.
Dispose of the parts or use them for other purposes.
2
1
3
Graphical depiction of the installation steps.
The numbers correspond to the sequence of installation steps, in accordance with
the instructions in the accompanying text.
A
B
C
X
Graphical depiction of the designation of components.
The letters denote the components mentioned in the accompanying text.
Detail view from a different direction, for example, the back or the bottom side of
the product.
18/84 Assembly
Bosch Rexroth AG
, MIT: BS 2/C-…, BS 2/R-…, 3 842 563 834/2022-08
